Made in USA, top quality
Comes with pre-assembled modular Semitec 104GT-2 thermistors, 12V 40W heater, 0.4mm Nozzle. Universal version - use it for both: direct and bowden feed.
This is Top Quality replica of popular V6 hotend. You will not experience same problems as you can have with other V6 clones. Properly machined, polished inside ALL METAL heatbreak will give you reliability superior to any other clone, you will not experience same clogging and jamming as with china clones. You can experiment with exotic print materials and get best possible results.
In addition to highest CNC quality, we have other improvements here - you will get Semitec 104GT-2 thermistor with pre-installed connector and connection cable, to simplify installation. Thermistor is equipped with fiberglass insulation and will withstand 300C+ print temperatures.
Hotend can be used for both: direct feed and bowden applications. For direct feed you will have to cut PTFE tube to necessary length, no other changes are necessary.
We will provide buyer with assembly manual and FAQ to troubleshoot any possible print issues.
V6 Hotend specs:
- Filament size: 1.75mm
- Nozzle diameter: 0.4mm
- Capable to print any 3D Printer plastic filament - Nylon, Carbon fiber ABS, Ninjaflex, ABS, PLA etc
- Works for both: direct feed and bowden configurations
- ATC Semitec 104GT-2 datasheet
- Small Size: 1.35mmx3.0mm glass bead
- Wiring insulation: high temperature teflon/PTFE
- Wiring length: 1 meter
- Use TEMP SENSOR #5 in Marlin
- 1 x All Metal Universal V6 hotend pre-asssembled 1.75mm Filament / 0.4mm Nozzle
- 1 x 12V 40W Heater Cartridge, 1 meter long wiring
- 1 x Modular Semitec 104GT-2 Thermistor with JST connector
- 1 x Connection cable for Semitec 104GT-2, 1 meter long
- 1 x Heatsink Shroud with High Speed Fan 3010 12V 0.13A, 1 meter long wiring
- 1 x Bowden tubing 4mm OD 2mm ID, 1 meter long
- 1 x PC4-M6 Straight Fitting
- 1 x Allen key hex driver for 2mm hex