Cart 0
DIY Hotend for RepRap 3D Printer 1.75mm / 0.3, 0.4 or 0.5mm Nozzle - RepRap Champion
 - 1

DIY Hotend for RepRap 3D Printer 1.75mm / 0.3, 0.4 or 0.5mm Nozzle

$ 15.99

DIY hotend requires heat sink to operate properly - metal base, aluminum block, or any other type of cooling device.

Assembly of this device is straight forward. Please consul with supplied drawings and pictures for visual clues. Suggested way of thermistor mounting: JB Weld steel epoxy or kapton tape.

DIY Hotend features:
  • 26mm long stainless PTFE lined barrel, for low friction, trouble free print.
  • Nozzle is based on MK8 makerbot nozzle geometry and can be exchanged or replaced with many different types of nozzles on the market. This will give you good selection of nozzle orifice diameters.
  • Low profile: only about 39 mm high.
  • NTC 3950 100K pre-wired thermistor.
NTC 3950 Thermistor parameters:
  • Small Size: 1.25mmx2.0mm glass bead
  • High accuracy: 1%
  • Resistance value at 25°C=100K
  • Wiring insulation: high temperature teflon/PTFE
  • Wiring length: 1 meter
Package Contents:
  • 1 x MK8 Nozzle 0.3, 0.4 or 0.5mm Extrusion (according to buyer selection).
  • 1 x Stainless PTFE lined barrel.
  • 1 x Aluminum heater block with one M3x3 setscrew.
  • 1 x 12V 40W Cartridge heater.
  • 1 x NTC 3950 Pre-wired thermistor

Share this Product

More from this collection