Cart 0
HEX Body M3 Stud Thermistor with Cable - RepRap Champion
 - 1

HEX Body M3 Stud Thermistor with Cable

$ 8.98

Easy to install Hex M3 Stud Thermistor features:

  • working temperature limit of 280C due to high temp. industrial epoxy resin used.
  • M3 stud threaded lenght is 3mm. This will allow to use shallower M3 threaded holes (such as on E3D heater block and clones).
  • Based on EPCOS 100K Thermistor B57560G1104F, see reprap wiki for more details.
  • Thermistor temperature table for firmware.
  • Connector type: JST 2 pin connector, 2.5mm spacing.
  • Hex Body length: 6mm
  • Length of leads: 55mm
Package Contents
  • 1 x Hex Thermistor based on NTC EPCOS B57560G1104F 100k Thermistor.
  • 1 x JST Male connector with crimp-on pins.
  • 1 x 1 meter long cable with JST connector on one side and dupont connectors (like for RAMPS) on other side.

Share this Product