This is a replica of newest and popular E3D V6 hotend, with important features of original E3D preserved. Hotend is all metal, it does not have plastic parts (PTFE liner) in hot zone. It is capable of printing higher melting temperature plastics such as polycarbonate and nylon.
NTC 3950 Thermistor parameters:
Supported in Marlin firmware. Use TEMP_SENSOR 11 in configuration.
Small Size: 1.25mmx2.0mm glass bead
High accuracy: 1%
Resistance value at 25°C=100K
Wiring insulation: high temperature teflon/PTFE
Wiring length: 1 meter
1 x Metal J-Head hotend 3.0mm / 0.5mm nozzle / 12V 40W Heater / NTC3950 Thermistor / 4mm OD 3.2mm ID PTFE Bowden Line 1 Meter long
1 x Heatsink shroud with 12V 0.13A High Speed Fan 3010S